|
WONCOTE SUPREME is a
water based textured finish coating that is designed
for interior applications over gypsum wallboard. It
is formulated with 100% acrylic polymer, marble aggregates,
inorganic pigments, integral mildewcides and other additives
that enhance the workability and performance of the
product.
WONCOTE SUPREME is the
ideal coating for both new and retrofit construction,
both in wall and ceiling applications. It can be used
as a substitute for paints and wallcoverings in areas
of high traffic or humidity.
 |
VOC Compliant |
|
Vapor permeable |
|
Superior adhesion |
|
Excellent workability |
|
A hard, durable surface |
|
A low maintenance coating |
|
Standard & custom colors available
|
WONCOTE SUPREME is packaged
in 70 lb. pails and must be applied at a rate not to
exceed 50-150 square feet per pail. Coverage will vary
depending on the desired texture and the porosity of
the substrate.
Surface Preparation
A. Interior gypsum wallboard
must be taped and finished using the standard procedures
required to prepare the surface for painting.
B. Previously painted
substrates must be thoroughly scraped to remove all
loose or peeling paint. Not for use over oil or solvent
based coatings.
C. Wallpaper and adhesive
must be thoroughly removed from any substrate to be
coated.
D. All substrates must
be sealed with Acroprimer prior to the application of
WONCOTE SUPREME.
Trowel Application
Apply a 1/16" coat of WONCOTE
SUPREME over a sealed substrate and then double
back with a second application texturing to a uniform
thickness of 1/8" to 3/16". Always complete
each unbroken area in one operation, working a wet edge
towards a natural break to avoid cold joints and to
assure uniformity of color and texture. Avoid thick
coats which may cause cracking; if required, it should
be built up in successive coats to the necessary thickness.
Hopper Gun Application
WONCOTE SUPREME can be
spray applied using equipment designed for aggregated
coatings. The spray equipment manufacturer specifications
must be followed. Select the correct nozzle for the
aggregate size. Spray with a steady even stroke and
cover the entire surface while maintaining an even distance
from the wall. Knock down textures are created by lightly
flattening the larger droplets with a stainless steel
trowel. Always complete each unbroken area in one operation,
working a wet edge towards a natural break to avoid
cold joints and to assure uniformity of color and texture.
Avoid thick coats which may cause cracking; if required,
it should be built up in successive coats to the necessary
thickness.
|
The performance of this product depends
upon its proper application, curing and the condition/preparation
of the substrate to which it is applied. Substrate
and ambient temperatures must be between 40°F
(4°C) and 100°F
(38°C) during application
and curing. |
|
Substrates must be sound and designed
to withstand all applicable loads. |
|
Substrate must be clean, free of cavities
or cracks and flat within 1/8" in any 4' radius. |
|
Protect all adjacent surfaces (door
frames, windows, etc.) adequately. |
|
Use in well ventilated areas. |
(Available upon request)
Minor dirt can be cleaned with a mild soap and water
solution. Stained or soiled surfaces may be recoated
with Acrocote.
The effectiveness of this product depends upon its
proper application and the condition and preparation
of the surface to which it is applied.
Limited Warranty: The product shall be in its unopened
package and of the kind specified within. THERE IS NO
OTHER WARRANTY OR REPRESENTATION OF ANY KIND, EXPRESS
OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY
OR OF FITNESS FOR A PARTICULAR PURPOSE). No warranty
shall be implied by law. This limited warranty continues
only until such time as the buyer opens the package
and examines its contents. If the buyer, after opening
the package and examining its contents, determines that
the product is not of the kind specified herein, the
buyer should write to PREMIX-MARBLETITE MANUFACTURING
COMPANY, 1259 NW 21st Street, Pompano Beach, Florida
33069, explaining the defect and enclosing a sample
of the product. PREMIX-MARBLETITE, upon receipt of the
sample from the buyer, will replace the portion of the
product that is determined to be defective. This shall
be the buyer's sole remedy for breach of warranty and
such remedy shall be in lieu of any claim for damages,
including consequential damages.
Some states do not allow limitations on how long an
implied warranty lasts, or exclusions or limitations
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may
also have other rights, which vary from state to state.
Solids by weight 85 % ± 1 %
Viscosity 127 PU ± 2
Wt. per gallon 14 lbs.
Water Vapor Transmission
ASTM E-96
20 U.S. Perms
Surface Burning
ASTM E-84
Flame Spread - 0
Smoke Developed - 3
Fuel Contribution - 0
Mildew Resistance
ASTM D-3273
No growth @ 28 days
Abrasion Resistance
ASTM D-968
No cracking or loss of film integrity
@ 1000 quarts of sand
Accelerated Weathering
ASTM G-26
No deterioration @ 3000 hours
PREMIX-MARBLETITE MFG. CO.
1259 NW 21st STREET
POMPANO BEACH, FL 33069
(800) 432-5097 · (954) 917-7665
FAX · (954) 917-2775
PREMIX-MARBLETITE MFG. CO.
325 OLD SANFORD OVIEDO ROAD
WINTER SPRINGS, FL 32708
(800) 432-5539 · (407) 327-0830
FAX · (407) 327-8942
AN III IMPERIAL INDUSTRIES COMPANY
|
Woncote
Supreme
