Poolcote Supreme

DESCRIPTION

POOLCOTE SUPREME is a high quality, factory blended swimming pool finish that will provide a white, marble-like finish.

USES

POOLCOTE SUPREME is the product of choice when the pool builder wants a high quality, factory prepared, scientifically blended swimming pool finish that will become an integral part of the pool construction. It has excellent bonding, leveling, filling and workability characteristics.

FEATURES & BENEFITS

	A factory controlled, pre-blended quality product that assures product consistency
	Exceptional workability that promotes the bonding and integrity of the finish coat to the substrate
	Resists check cracking and shrinkage that is common in cementitious products
	Resists check cracking and shrinkage that is common in cementitious products

COVERAGE

POOLCOTE SUPREME is packaged in 80 lb. bags and must be applied at a rate not to exceed 25-30 square feet per bag. Coverage will vary depending on the porosity of the
substrate.

SURFACE PREPARATION

Patch, level or resurface as required to provide a smooth substrate. Surface must be clean, cool, dry and free of dirt, grease, paint, release agents, curing agents, special surface hardeners, efflorescence or other foreign matter that may prevent or inhibit proper bonding.

NOTE: Only the experienced applicator at poolside can make the decisions as to what surface preparation may be required.

1) On previously plastered pools it is necessary to grind around the tile,lights, returns, etc., to allow for a smooth transition.

2) On previously painted pools, the surface must be sandblasted to remove the old paint completely.

3) Thoroughly wash the surface with a TSP solution to remove body oils and suntan lotions. Acid wash with a 50/50 solution of muriatic acid and water, rinse with a neutralizing solution of baking soda and water, then finally rinse with clean water.

4) An application of Surebond 80 is highly recommended on previously
plastered surfaces as a bond or scratch coat to provide a uniform base for adhesion and even curing.

MIXING

Measuring equal amounts of water and mixing for equal amounts of time from batch to batch will ensure product consistency from batch to batch. Boxing different batch #'s will ensure final color uniformity. POOLCOTE SUPREME will require approximately 2-2 ½ gallons of potable water per bag. Start the mixing process by adding ? of the total required water to the mixer. Add the appropriate amount of POOLCOTE SUPREME and then add the remaining ? of the required water. Mix for approximately 5 minutes to bring the material to a workable consistency. Allow the mix to set for 5 minutes, then remix and add additional water if necessary to achieve the desired workable consistency. Do not retemper the mix after this.

POOLCOTE SUPREME is a complete product and requires no other additives. To avoid any complications it is highly recommended that no calcium chloride be used.

If you choose to use calcium chloride, it must be used with caution, as "more is not better". It is always best to use 94 - 97% purity at a maximum of 1/3 lb. per bag. If 77% purity is used, the maximum is ½ lb. per bag. 77% purity contains 23% filler material, which may include ingredients that could be harmful to the finished product. Always pre-dissolve calcium chloride and remove impurities by straining through cheesecloth.

NOTE: At the maximum addition rates, flash setting, trowel burning and other difficulties in both placing and finishing may occur.

APPLICATION

1) After POOLCOTE SUPREME has been properly mixed, it may be trowel or spray applied over a dampened substrate. The recommended thickness is ?".

2) Allow POOLCOTE SUPREME to stiffen sufficiently. Let the water leave the surface before smooth troweling the finish.

NOTE: Only tools that will not mar or stain the POOLCOTE SUPREME surface should be used. For a smoother surface use a stainless steel trowel to finish.

3) POOLCOTE SUPREME is designed to be a monolithic coating. Sufficient personnel should be employed to eliminate cold joints. If the pool must be completed in phases, predetermined stopping points must be used, such as tile lane markers, etc.

4) If the entire finishing process is completed in one day, fill the pool immediately and adjust the chemicals as recommended by Premix-Marbletite and NSPI.

CLEAN UP

Clean all tools and equipment with water while still wet. Cured material can be removed mechanically or chemically.

STORAGE

Turn inventory regularly and keep bagged product protected from all forms of moisture, both direct and indirect, to assure maximum product usage, uniformity and productivity.

TECHNICAL SERVICES
(Available upon request)

MAINTENANCE

The long-term performance of POOLCOTE SUPREME will be directly proportional to the care taken during the filling process, the first ninety days of pool maintenance and consistent routine maintenance thereafter. Adjust the chemicals to the following levels in the order as recommended by Premix and NSPI:

a) pH 7.4 - 7.6

b) Alkalinity 100 - 125 ppm

c) Calcium 250 - 400 ppm

d) Chlorine gradually to 2 ppm

e) Total dissolved solids <1000 ppm

f) Cyanuric acid <50

NOTE: During the start-up phase keep the pool pump running 24 hours a day until the water clears. The pool should be brushed twice a day for the first week.

WARRANTY

The effectiveness of this product depends upon its proper application and the condition and preparation of the surface to which it is applied.

Limited Warranty: The product shall be in its unopened package and of the kind specified within. THERE IS NO OTHER WARRANTY OR REPRESENTATION OF ANY KIND, EXPRESS OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE). No warranty shall be implied by law. This limited warranty continues only until such time as the buyer opens the package and examines its contents. If the buyer, after opening the package and examining its contents, determines that the product is not of the kind specified herein, the buyer should write to PREMIX-MARBLETITE MANUFACTURING COMPANY, 1259 NW 21st Street, Pompano Beach, Florida 33069, explaining the defect and enclosing a sample of the product. PREMIX-MARBLETITE, upon receipt of the sample from the buyer, will replace the portion of the product that is determined to be defective. This shall be the buyer's sole remedy for breach of warranty and such remedy shall be in lieu of any claim for damages, including consequential damages. Some states do not allow limitations on how long an implied warranty lasts, or exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

The information contained in this bulletin conforms to the standard detail recommendations and specifications for the installation of the products manufactured by PREMIX-MARBLETITE and is presented in good faith. PREMIX-MARBLETITE assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any project.

CORPORATE

1259 N.W. 21st STREET
POMPANO BEACH, FL 33069
(954) 917-7665
(800) 432-5097
FAX (954) 917-2775

PREMIX-MARBLETITE MFG. CO.
325 OLD SANFORD OVIEDO ROAD
WINTER SPRINGS, FL 32708
(407) 327-0830
(800) 432-5539
FAX (407) 327-8942

AN III IMPERIAL INDUSTRIES COMPANY